Lacrosse is a sport that has gained much popularity over the years and it has become one of the most popular sports in Canada. However, when you are outdoors and playing lacrosse, it can be difficult to find a perfect spot to play because of all the potential surfaces that could be ruined by moisture. One solution to this problem is creating your own lacrosse rebounder which will allow you to practice holding and swing techniques indoors.
Materials
To make the best lacrosse rebounder, you will need a surface that is flat and firm, such as plywood or drywall. Carpet can also be used to prevent your ball from moving around on the wall. You will also need two pieces of wood that are cut to be 1-1/2 inches in width and at least 24 inches in length. Screws and wood glue should also be included in your materials list.
Setting up the Lacrosse Rebounder
Start by placing the two pieces of wood on top of each other and using the screws, fasten them together to make one solid piece. Take the wall surface or drywall and attach it to one side of this piece with screws. Then take the carpet and cut it so that it is 12 inches wide by 24 inches long. Cut a 4 inch slit in one end of this carpet, which will be secured by nails or staples to the wood on one side only. Use your screws to attach this surface onto your lacrosse rebounder.
With this rebounder made, you can practice your lacrosse holding and shooting techniques to improve your skills.
How to Use It
Many people often neglect the importance of improving their lacrosse holding and shooting abilities and this results in them making gross mistakes during actual games. To avoid these errors, one should regularly work on their ball handling abilities so that they will be able to perform better during a game. The lacrosse rebounder allows you practice in a safe manner without worrying about ruining any surfaces or breaking windows with your ball.
Money-Saving Tip
If you wish to save time, you can use the wall surface that you already have as your rebounder. In this case, all you will need to do is to make sure that the surface is flat and firm. When doing so, it is important that you place it on the opposite side of your padded area and then fasten it together with screws or staples.
